PICO-DVI-LCD

PICO-DVI-7inch DVI 1024×600

PICO-DVI-10inch

{{{name3}}}

{{{name4}}}

{{{name5}}}

Primary Attribute Category: {{{userDefinedInfo}}}: {{{userdefinedvalue}}} Brand: Waveshare

Website International: Website Chinese: 官网

Onboard Interfaces

Related Products

Overview

Parameters

PICO-DVI-7inch

Parameter Name	Parameters
Screen Type	IPS
Communication Type	DVI
Resolution	1024(H)RGB x 600(V) Pixels
7inch Pixel Size	0.1506(H) x 0.1432(V)mm
7inch Display Size	154.2144(H) x 85.92(V)mm
7inch Dimensions	164.70(H) x 100.00(V) mm

PICO-DVI-10.1inch

Parameter Name	Parameters
Screen Type	IPS
Communication Type	DVI
Resolution	1024(H)RGB x 600(V) Pixels
10.1inch Pixel Size	0.2175(H) x 0.2088(V)mm
10.1inch Display Size	222.72(H) x 125.28(V)mm
10.1inch Dimensions	232.72(H) x 136.28(V) mm

Pinout

PICO-DVI-LCD Demo

• The demo is modified from Wren6991 PicoDVI

Main Directory Analysis

• apps: Demo source code.
• assets: Original picture and picture header file.
• include: the default pins configuration header file.
• libdvi: the related DVI driver source code.
• libgui: the related GUI source code.

Hello DVI Demo

• The Hello DVI demo is located in the apps directory under the hello_dvi file.
• Scroll through a test image with a resolution of 320x240p RGB565 in 640x480p 60Hz DVI mode.

Gui Demo

• The Gui demo is located under the GUI demo file in the apps directory.
• In 640x480p 60Hz DVI mode, brush white, red, yellow, green, cyan, blue, purple, and black, and then the GUI image.

Resource

Matched Resource

Document

• Schematic

Demo

• Example Demo

Development Software

• Thonny Python IDE (Windows V3.3.3)
• Zimo221.7z
• Image2Lcd.7z

Pico Quick Start

Download Firmware

• MicroPython Firmware Download

• C_Blink Firmware Download

Video Tutorial

• Pico Tutorial I - Basic Introduction

• Pico Tutorial II - GPIO

• Pico Tutorial III - PWM

• Pico Tutorial IV - ADC

• Pico Tutorial V - UART

• Pico Tutorial VI - To be continued...

MicroPython Series

• 【MicroPython】 machine.Pin Function
• 【MicroPython】 machine.PWM Function
• 【MicroPython】 machine.ADC Function
• 【MicroPython】 machine.UART Function
• 【MicroPython】 machine.I2C Function
• 【MicroPython】 machine.SPI Function
• 【MicroPython】 rp2.StateMachine

C/C++ Series

• 【C/C++】 Windows Tutorial 1 - Environment Setting
• 【C/C++】 Windows Tutorial 1 - Create New Project

Arduino IDE Series

Install Arduino IDE

1. Download the Arduino IDE installation package from Arduino website.
   
2. Just click on "JUST DOWNLOAD".
   
3. Click to install after downloading.
   
4. Note: You will be prompted to install the driver during the installation process, we can click Install.
   

Install Arduino-Pico Core on Arduino IDE

1. Open Arduino IDE, click the File on the left corner and choose "Preferences".
   
2. Add the following link in the additional development board manager URL, then click OK.
   

   https://github.com/earlephilhower/arduino-pico/releases/download/global/package_rp2040_index.json

   
   Note: If you already have the ESP8266 board URL, you can separate the URLs with commas like this:

   https://dl.espressif.com/dl/package_esp32_index.json,https://github.com/earlephilhower/arduino-pico/releases/download/global/package_rp2040_index.json
   

3. Click on Tools -> Dev Board -> Dev Board Manager -> Search for pico, it shows installed since my computer has already installed it.
   
   

Upload Demo At the First Time

1. Press and hold the BOOTSET button on the Pico board, connect the Pico to the USB port of the computer via the Micro USB cable, and release the button when the computer recognizes a removable hard drive (RPI-RP2).
   
   
2. Download the demo, open arduino\PWM\D1-LED path under the D1-LED.ino.
3. Click Tools -> Port, remember the existing COM, do not need to click this COM (different computers show different COM, remember the existing COM on your computer).
   
4. Connect the driver board to the computer with a USB cable, then click Tools -> Ports, select uf2 Board for the first connection, and after the upload is complete, connecting again will result in an additional COM port.
   
5. Click Tool -> Dev Board -> Raspberry Pi Pico/RP2040 -> Raspberry Pi Pico.
   
6. After setting, click the right arrow to upload.
   
   • If you encounter problems during the period, you need to reinstall or replace the Arduino IDE version, uninstall the Arduino IDE needs to be uninstalled cleanly, after uninstalling the software you need to manually delete all the contents of the folder C:\Users\[name]\AppData\Local\Arduino15 (you need to show the hidden files in order to see it) and then reinstall.

Open Source Demo

• MicroPython Demo (GitHub)
• MicroPython Firmware/Blink Demo (C)
• Official Raspberry Pi C/C++ Demo
• Official Raspberry Pi MicroPython Demo
• Arduino Official C/C++ Demo

Support

Technical Support

If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 PM GMT+8 (Monday to Friday)

Submit Now