8inch 1536x2048 LCD

From Waveshare Wiki
Jump to: navigation, search

Overview

Introduction

This product is a general-purpose 8-inch HDMI display with a resolution of 1536 x 2048 and a capacitive touch panel. Support Raspberry Pi, and it also can be used as a computer monitor.

Feature

  • 8-inch IPS screen, 1536 x 2048 hardware resolution.
  • 10-point capacitive touch, with toughened glass panel, hardness up to 6H.
  • Adopting optical bonding technology, the display effect is better.
  • Supports Raspberry Pi OS / Ubuntu and Kali when used with Raspberry Pi4B.
  • Supports Windows 11 /10 /8.1 / 8 / 7 when used as a computer monitor.
  • Built-in high-fidelity speakers with 3.5mm audio, support HDMI audio output.
  • Full metal CNC alloy enclosure.

Parameters

Item Description Unit
Model 8inch 1536 x 2048 LCD /
Size 8.0 Inch
Viewing Angle 178 Deg
Resolution 1536 x 2048 Pixels
Dimensions 190.00 (H) × 128.00 (V) × 11 (D) mm
Display area 159.74 (H) × 119.80 (V) mm
Pixel Pitch 0.026 (V) x 0.078 (H) mm
Color Gamut 66% NTSC
Maximum Brightness 470 cd/m²
Contrast 1000:1 /
Backlight Adjustment Button dimming /
Refresh Rate 60 Hz
Display Port Standard HDMI port /
Power Port 5V Type-C power supply /
Power Consumption 4 Watt
Weight 311 g

Electrical Specifications

Parameter Minimum Standard Maximum Unit Note
Input Voltage 4.75 5.00 5.25 V Note 1
Input Current 750 800 TBD mA Note 2
Operating Temperature 0 25 60 Note 3
Storage Temperature -10 25 70 Note 3

•Note 1: Input voltage exceeding the maximum value or improper operation may cause permanent damage to the device.
•Note 2: The input current must be ≥750mA, otherwise, it will cause booting failure or abnormal display, and it may cause permanent damage to the device if it is in an abnormal state for a long time.
•Note 3: Please do not store the display in a high-temperature and high-humidity environment for a long time. The display must work within the limited value range, otherwise, it may be damaged.

EDID Sequence Parameters

If the system of the main control board can automatically recognize the EDID for display, there is no need to additionally set related timing parameters.

Otherwise, you can refer to the following EDID settings:

Pixel Clock H Addressable H Blanking V Addressable V Blanking H Front Porch H Sync Width V Front Porch V Sync Width H Image Size V Image Size H Border V Border
295.00 1536 724 2048 80 200 64 60 10 294 165 0 0

Interface Introduction

8inch 1536x2048 LCD01.jpg

User Guide

Working With Raspberry Pi 4

Hardware Connection

  1. Connect the Touch port to the USB port of the Raspberry Pi.
  2. Connect the HDMI port to the HDMI port of the Raspberry Pi.

8inch 1536x2048 LCD02.jpg

Software Setting

Raspberry Pi OS / Ubuntu / Kali and Retropie systems are supported.
When the LCD works on systems such as Raspberry Pi, the resolution must be manually set, otherwise, it will cause incorrect display resolution and affect the experience.

1. Please download the newest image from Raspberry Pi official website.
2. Download the compressed file to the PC and decompress it to get the .img file.
3. Connect the TF card to the PC, and use SDFormatter to format the TF card.
4. Open the Win32DiskImager software, select the system image prepared in step 1, and click write to burn the system image.
5. After the programming is completed, open the config.txt file in the root directory of the TF card, add the following code at the end of config.txt, save and eject the TF card safely.

hdmi_group=2
hdmi_mode=87
config_hdmi_boost=4
hdmi_pixel_freq_limit=356000000
hdmi_timings=1536 0 500 66 158 2048 0 60 10 10 0 0 0 60 0 295000000 3
max_framebuffer_width=1536
max_framebuffer_height=2048
framebuffer_width=1536
framebuffer_height=2048

6. Insert the TF card into the Raspberry Pi, power on the Raspberry Pi, and wait for a few seconds for a normal display.

Display Rotation

If you're using a Pi4, you can rotate it by the following method:

  • 1. Open Screen Configuration.

8inch 1536x2048 LCD05.jpg

  • 2. Set the rotation as shown below:

8inch 1536x2048 LCD06.jpg
8inch 1536x2048 LCD07.jpg
8inch 1536x2048 LCD08.jpg

  • 3. After rotating and touching, it can be used normally.

If you're using a Pi3+, or older, rotate it via:

  • 1. Add statements to the config.txt file (the config file is located in the root directory of the TF card, ie /boot):
display_rotate=1 #1:90;2: 180; 3: 270
  • 2. Save and restart the Raspberry Pi:
sudo reboot

Rotate Touch

After rotating the display, the touch position is wrong because the touch does not change with the display angle. So you need to modify the touch. By taking a card pin or tweezers, press the following positions to touch and rotate.
(In order to avoid accidental touch, we hide the Rotate Touch button inside the case.)
8inch 1536x2048 LCD70.png

Working With PC

Support Windows 11/10/8.1/8/7 System

How to Use

1. Connect the Touch port of the LCD to the USB port of the PC, and Windows will automatically identify the touch function.
2. Connect the HDMI port of the LCD to the HDMI port of the PC, and Windows will automatically identify the display function.
8inch 1536x2048 LCD71.jpg

  • Note:
  • Some PCs do not support the plug-and-play function of HDMI devices, and it can be normal after rebooting the system.
  • If there is no sufficient power for the USB port, the LCD screen may flash. After connecting the 5V 1A power adapter to the Power port of the LCD, it can be normally used.

Windows Touch Calibration

Take Windows 10 as an example:

  • 1. Enter the Windows settings of the system, type in the search bar and click "Calibrate the screen for pen or touch input" (as shown in the picture below):

Win10 touch011.png

  • 2. Click "Setup" in the pop-up "Tablet PC Settings" interface:

Win10 touch02.png

  • 3. The following text prompt will appear on the screen. Please tap the touch screen with your finger, and the computer will recognize it as a touch screen.
【Note】If the touch screen is blank, press the "Enter" key, and the text prompt will switch to the touch screen. (The screen which displays the text prompt will be used as a touch screen!)

Win10 touch03.png

Outline Dimensions

8inch 1536x2048 LCD780.jpg

Support



Technical Support

If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 PM GMT+8 (Monday to Friday)